Ricoh B832 Посібник з експлуатації - Сторінка 36
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Аксесуари для принтерів Ricoh B832. Ricoh B832 37 сторінок.
Друкувати сторінку
10 March 2006
Sensors
No.
S35
6th Paper End Sensor
S36
6th Paper Feed Sensor
S37
6th Paper Height Sensor 1
S38
6th Paper Height Sensor 2
S39
6th Paper Height Sensor 3
S40
6th Paper Height Sensor 4
S41
6th Paper Length Sensor (B834)
S42
6th Paper Width Sensor 1 (B834)
S43
6th Paper Width Sensor 2 (B834)
S44
6th Paper Width Sensor 3 (B834)
S45
6th Paper Size Sensor 1 (B832)
S46
6th Paper Size Sensor 2 (B832)
S47
6th Paper Size Sensor 3 (B832)
S48
6th Relay Sensor (B834)
S49
6th Transport Sensor
S50
LCT Exit Sensor
S51
LCT Image Position Sensor
Name
lift motor off.
Detects when the last sheet feeds from the 6th
tray.
Detects the paper when it arrives at the 6th paper
feed roller and checks for misfeeds.
4th from the bottom of the 6th tray, detects stack
height: 100%
5th from the bottom of the 6th tray, detects stack
height: 75%
6th from the bottom of the 6th tray, detects stack
height: 50%
4th from the bottom of the 6th tray, detects stack
height: 25% and signals near-end.
Detects the length of the paper in the 6th tray
(used in combination with the paper width
sensors).
1 of a set of 3 sensors that detect the width of the
paper in the 6th tray.
1 of a set of 3 sensors that detect the width of the
paper in the 6th tray.
1 of a set of 3 sensors that detect the width of the
paper in the 6th tray.
1 of a set of 3 sensors that detect the width of the
paper in the 6th tray.
1 of a set of 3 sensors that detect the width of the
paper in the 6th tray.
1 of a set of 3 sensors that detect the width of the
paper in the 6th tray.
Detects the leading and trailing edges of the paper
in the paper path near the 6th tray. Checks the
timing of the feed and signals a jam if the paper is
late or lags at this location.
Detects jams in the paper path where the
transport motor feeds the paper from the 6th tray.
Detects jams at the exit of the LCT unit.
Mounted on the CRB (CIS Relay Board), this
contact image sensor detects the side-to-side
edges of the paper in the paper path. The
machine uses this information to correct the
position of the image when the lasers fire.
B832-33
OVERALL MECHANICAL INFORMATION
Description