Ricoh G056 Технічний бюлетень - Сторінка 11
Переглянути онлайн або завантажити pdf Технічний бюлетень для Аксесуари для принтерів Ricoh G056. Ricoh G056 46 сторінок. Envelope feeder
Також для Ricoh G056: Посібник з монтажу (1 сторінок), Посібник з монтажу (1 сторінок)
Друкувати сторінку
Reissued: 20-Apr-01
Model:
Model K-P1
Firmware Updating Procedure
1. Prepare 2 IC cards with the controller firmware.
2. Turn off the main switch.
3. Remove the IC card slot cover on the rear side of the machine as shown.
4. Insert the IC card-1 and turn on the main switch.
"Onboard Sys. 1/2" is displayed.
5. Press "# Enter."
Note: Make sure that ∗ is displayed.
6. Scroll with the [ ] [ ] key and select "Update."
Press "# Enter" to start downloading.
The "On Line" LED starts blinking and the machine starts to
download the program.
(Notice that the ∗ mark disappears as the program is
downloaded.)
7. When updating card-1 is finished, "Update 1/2 task done" is
displayed.
8. Turn off the main switch and replace the card with IC card-2.
Turn on the main switch, then downloading will automatically
start.
9. When updating card-2 is finished, "Update done" is displayed.
Then, remove the card, turn on the main switch and print the
configuration sheet.
Check that controller firmware is successfully updated.
T
B
echnical
ulletin
Date:
12-April-01
Onboard Sys. 1/2
Onboard Sys. 1/2
∗
Updating
∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗
Update 1/2 task done
Updating
∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗
Update done
PAGE: 2/2
No.:
RG058001a
Update