Ricoh LCIT RT5060 Технічний бюлетень - Сторінка 15

Переглянути онлайн або завантажити pdf Технічний бюлетень для Аксесуари для принтерів Ricoh LCIT RT5060. Ricoh LCIT RT5060 24 сторінки.

echnical

ulletin

PAGE: 2/7

Reissued:5-Dec-13

Model:

Date:

No.:

Large Capacity Tray RT5060 (D516)

6-Nov-13

RD516005

Solution

The exit guide plate will be re-modified in Nov 2013.

Request

Check the serial number to see if the LCT is affected or not on your next visit. If affected,

perform the rework described below. RCL will supply the following parts/tools required for

the rework free of charge.

D0749911: BEARING:KIT

IMPORTANT: Information exclusive for Ricoh Europe

In addition to the s/n, check if a green dot (as shown in the photo below) is attached to the

left side of the s/n label. If attached, the machine has already been reworked at RPL and

therefore rework is unneeded even if the machine has an affected s/n.

Rework procedure for the affected units

1. Disconnect the LCT from the mainframe. Turn the LCT 90 degrees as shown and

connect the I/F cable to the mainframe.

2. Turn on the main power.