Ricoh PJ X4241N Посібник користувача - Сторінка 12

Переглянути онлайн або завантажити pdf Посібник користувача для Проектор Ricoh PJ X4241N. Ricoh PJ X4241N 24 сторінки.
Також для Ricoh PJ X4241N: Посібник користувача (28 сторінок), Примітки для користувачів (2 сторінок)

Друкувати сторінку

1. Safety Information

About the Batteries

Explains things that you should follow in regard to the batteries.

• For safe operation, follow the warnings below regarding the batteries. If you use the batteries

incorrectly, it may result in fire or injury due to batteries leaking or exploding.

• Do not use batteries other than the ones specified.

• Do not mix and use batteries that are different types or that are new and old.

• Correctly insert batteries according to the polarity ( / ).

• Do not charge non-rechargeable batteries.

• Do not heat or throw the batteries into fire or water.

• Do not connect the positive and negative terminals on a battery with a wire.

• Remove the batteries that are past their suggested use period or that are depleted.

• Remove the batteries when they will not be used for extended periods.

• Keep the batteries out of the reach of children. Children may swallow or choke on the

batteries. If this happens, contact a doctor immediately.

What to do if a battery has leaked

• If leakage from a battery adheres to your skin, rinse it with water immediately, and then

contact a doctor.

• Wipe off the leakage with tissue paper while being careful not to touch it.

• Soak the tissue paper that you used in water, and then throw it away as burnable trash.

About the Lamp

Explains things that you should follow in regard to the lamp.

• Do not look into the lens or vent when the machine is on. The bright light may damage your

eyes. Be especially careful in an environment with children.

• Before replacing the lamp, turn off the power and wait at least one hour to allow the machine

to cool completely. If it is not completely cool, you may burn or injure yourself due to the inside

of the machine and lamp unit being hot. If you replace the lamp without unplugging the power

cord from the power outlet, electric shock or explosion may occur.

• Be careful when handling the used lamp so that it does not break. If it breaks, it may cause

injury.