Epson ELPDC06 Document Camera For serial numbers beginning with LQZF - DC-06 Document Camera Посібник користувача - Сторінка 17

Переглянути онлайн або завантажити pdf Посібник користувача для Проектор Epson ELPDC06 Document Camera For serial numbers beginning with LQZF - DC-06 Document Camera. Epson ELPDC06 Document Camera For serial numbers beginning with LQZF - DC-06 Document Camera 22 сторінки. User's guide
Також для Epson ELPDC06 Document Camera For serial numbers beginning with LQZF - DC-06 Document Camera: Технічні характеристики (6 сторінок), Посібник із швидкого старту (4 сторінок), Посібник із швидкого старту (1 сторінок), Технічні характеристики (2 сторінок), Посібник користувача (22 сторінок)

Appendix

Solving Problems

Problem

No image appears

The image is out of focus

Problems with the ArcSoft Application software for

ELPDC06

Error Message

The connection to your camera

was lost.

The camera is not found. The

camera is in use by another

program or is not connected.

Make sure that the camera is

connected and working

properly, then try again.

The camera is not found or is

not working properly.

Please click Connect button

and try again.

If you notice any image problems or if you suspect the document camera is broken when

installing or using it, stop using the unit. Contact the Epson service center that is indicated in

the User's Guide supplied with the projector you are using with the document camera.

Solution

Check that the USB cable is connected properly and that the

power indicator is on.

Make sure that the document (subject of the image) is not too

close to the camera lens.

The auto focus may not be able to focus in the following

situations. Press the [Focus] button again.

v Subject matter has low contrast between light and dark

areas

v Subject matter has repeated detailed patterns, such as

horizontal stripes and checkered patterns

v Image is dark overall

v Subject matter has a bright background

Solution

Make sure that the USB cable is connected securely, and

then click the

If a webcam or device other than the unit is connected,

disconnect it.

Make sure that the USB cable is connected securely, and

then click the

button again.