Ricoh G413 Додаткові інструкції з експлуатації - Сторінка 34

Переглянути онлайн або завантажити pdf Додаткові інструкції з експлуатації для Сканер Ricoh G413. Ricoh G413 47 сторінок. Image scanner

VRS Getting Started Guide

To change the Skew tab settings

From the VRS Interactive Properties dialog box, select the Skew tab.

Adjust the movable angle control arm until the image is straight:

a Use the mouse to select the vertical arm. When selected, the pointer changes to a hand

icon.

b Move the arm counter-clockwise to rotate the image to the left, or clockwise to rotate

it to the right. The Angle setting changes as the image rotates; the valid range is -45

degrees to 45 degrees.

In the Angle box, you have two ways to adjust the Angle setting:

a Place your cursor in the Angle box, click the arrows to review the list of settings, and

click your selection.

b Type a value for the correction angle directly into the Angle box.

The valid range for the angle is -45 degrees to 45 degrees.

Using the Fine Angle Adjustment Slider, you can fine-tune the deskew angle in single

degree, or partial degree, increments, as follows:

a By moving the slider all the way to the left, you select a complete one-degree, counter-

clockwise angle adjustment.

b By moving the slider all the way to the right, you select a complete one-degree,

clockwise angle adjustment.

c By moving the slider to a position in between the leftmost or rightmost setting, you

select an angle shift that is less than a full degree. Each line on the slider scale

represents 5 percent of one degree.

Kofax Image Products