Epson EMP 30 - PowerLite 50c XGA LCD Projector Інформація про продукт - Сторінка 7
Переглянути онлайн або завантажити pdf Інформація про продукт для Проектор Epson EMP 30 - PowerLite 50c XGA LCD Projector. Epson EMP 30 - PowerLite 50c XGA LCD Projector 13 сторінок. Epson powerlite 70c: quick start
Також для Epson EMP 30 - PowerLite 50c XGA LCD Projector: Технічні характеристики (2 сторінок), Швидке налаштування (2 сторінок)
Друкувати сторінку
Adjusting the Image Shape
If the projected image isn't square or has a "keystone" shape,
do one or more of the following:
If your image looks like
projector off to one side of the screen, at an angle. Move it
directly in front of the center of the screen, facing the screen
squarely.
If your image looks like
the
button to correct the shape of the image. After
Keystone
correction, your image will be slightly smaller.
Keystone button
The
button corrects up to a 15° tilt. After
Keystone
correction, your image will be smaller. You can also perform
electronic keystone correction using the projector's Setting
menu.
Note:
If the image is noticeably uneven after keystone correction, reduce
the Sharpness setting using the Video menu.
Adjusting the Image Quality
You may need to adjust the projector's
settings on the Video menu if your computer image has any of
these quality problems:
Flashing or blurry image
Vertical or horizontal stripes
Only a portion of the image is displayed
Note:
You can also increase computer image clarity by pressing the Auto
button on the remote control to optimize the tracking, sync, and
position settings. Turn off E-Zoom and A/VMute before using the
Auto button.
or
, you've placed the
or
, press the
or
side of
+
–
and
Tracking
Sync
Switching Between Picture Sources
You can connect the projector to one computer source and
one video source at the same time. Then you use the buttons
on the projector or remote control to switch between them.
Press the
button on the projector to switch between
Source
computer, S-video, and composite video sources.
Press the
Computer
remote control to select the source you want to use.
After you select a source, the screen goes dark for a moment
before the image appears.
Projector Status Lights
If your projector isn't working correctly, first turn it off, wait
for it to cool, and unplug it. Then plug the power cord back in
and turn on the projector. If this doesn't solve the problem,
check the lights on top of the projector. They alert you to
problems with projector operations.
Light
Status
off
orange
flashing
green
green
flashing
orange
01/01
EPSON Powerlite 50c/70c
,
, or
button on the
Video
S-Video
Power light
Description and action
The projector is unplugged. Press the
Power button to turn off the projector,
check that the power cable is connected
securely at both ends, then press the
Power button to turn on the projector.
The projector is in sleep mode. You can
unplug it to disconnect the power or press the
Power button to turn on the projector lamp.
The projector is warming up. Wait for the
image to appear.
The projector is operating normally.
The projector lamp is off and the projector is
cooling down. Wait until the light stops
flashing and then press the
Power button
to turn on the projector. (You can't turn the
projector on or unplug it when the light is
flashing orange.)
EPSON Powerlite 50c/70c - 7
Error light