Cisco 1100 Series Посібник з встановлення обладнання - Сторінка 21

Переглянути онлайн або завантажити pdf Посібник з встановлення обладнання для Мережевий маршрутизатор Cisco 1100 Series. Cisco 1100 Series 44 сторінки. Terminal gateway
Також для Cisco 1100 Series: Встановлення та оновлення (15 сторінок), Посібник (12 сторінок)

Друкувати сторінку

Cisco 1100 Series Посібник з встановлення обладнання

Prepare for Router Installation

See the following online document for more information about network connections and interfaces:

• Cisco Modular Access Router CableSpecifications

Ethernet Connection

Note

To reduce the risk of electric shock, the following ports must be connected through an approved network

termination unit with integral circuit protection if the port cabling is routed outdoors: ethernet. Statement 1044

The IEEE has established Ethernet as standard IEEE 802.3. The routers support the following Ethernet

implementations:

• 1000BASE-T—1000Mb/s full-duplex transmission over a Category 5 or better unshielded twisted-pair

• 100BASE-T—100 Mb/s full-duplex transmission over a Category 5 or better unshieldedtwisted-pair

• 10BASE-T—10Mb/s full-duplex transmission over a Category 5 or better unshielded twisted-pair (UTP)

See the Cisco Modular Access Router Cable Specifications document at Cisco.com for information about

Ethernet cables, connectors, and pinouts

Required Tools and Equipment for Installation and Maintenance

You need the following tools and equipment to install and upgrade the router and its components:

• ESD-preventive cord and wriststrap

• Number 2 Phillipsscrewdriver

• Phillips screwdrivers: small, 3/16-in. (4 to 5 mm) and medium, 1/4-in. (6 to 7mm)

• To install or removemodules

• Screws that fit yourrack

• Wire crimper

• Wire for connecting the chassis to an earthground:

(UTP) cable. Supports the Ethernet maximum length of 328 feet (100 meters).

cable. Supports the Ethernet maximum length of 328 feet (100 meters).

• 6 AWG

Hardware Installation Guide for the Cisco 1100 Terminal Gateway

Ethernet Connection