Epson EMP 600 - SVGA LCD Projector Короткий довідник - Сторінка 8
Переглянути онлайн або завантажити pdf Короткий довідник для Проектор Epson EMP 600 - SVGA LCD Projector. Epson EMP 600 - SVGA LCD Projector 17 сторінок. Quick reference guide
Друкувати сторінку
Adjustment
Correcting keystone distortion
Page 44 of User's Guide
Tip
When keystone correction is carried
out, the projected image will become
smaller.
The keystone correction settings are
memorized, so that if you change the
position or angle of the projector, you may
need to readjust the keystone correction
settings.
To return an altered keystone correction
setting to the factory default setting, do
the following.
To restore the vertical keystone correction
to the default setting: While holding down
the
button, press the
button for
1 second or more.
To restore the horizontal keystone
correction to the default setting: While
holding down the
button, press the
button for 1 second or more.
If the images become uneven in
appearance after keystone correction is
carried out, decrease the Sharpness
setting.
If the images have keystone distortion ...
Press
on the projector's control panel to correct the keystone distortion.
If using both horizontal and vertical keystone correction,
carry out in the following order.
1 . With the front adjustable foot retracted, set the projector so that it is fully horizontal.
2 . Extend the front adjustable foot to adjust the angle as necessary.
3 . Adjust the vertical keystone distortion until both sides of the picture are vertical.
4 . Adjust the horizontal keystone distortion until the top and bottom edges of the picture are both horizontal.
Correction in
vertical direction
Correction in
horizontal direction