Cisco 2500 Series Посібник з конфігурації - Сторінка 13

Переглянути онлайн або завантажити pdf Посібник з конфігурації для Мережевий маршрутизатор Cisco 2500 Series. Cisco 2500 Series 19 сторінок. Wireless controller
Також для Cisco 2500 Series: Посібник з встановлення (12 сторінок), Посібник з розгортання (23 сторінок), Посібник з конфігурації (50 сторінок), Посібник для початківців (47 сторінок)

Step 2

Set the line speed and the flow control for the asynchronous lines. Hardware flow

control must be configured to allow proper communications with modems.

Async line speed [9600]:57600

Configure for HW flow control? [yes]:

For additional information on configuring modem connections see the section

"Modems" in the appendix "Internetworking Primer."

Enter yes if you will be connecting modems to your access server to allow remote

Step 3

sessions, and to configure your modems to use the default chat script:

Configure for modems? [yes/no]: yes

Configure for default chat script? [yes]:

Configure your system to allow serial line internet protocol (SLIP) and

Step 4

Point-to-Point protocol (PPP) access, as follows:

Configure for Dial-in IP SLIP/PPP access? [no]: yes

Configure for Dynamic IP addresses? [yes]: no

Configure Default IP addresses? [no]: yes

Configure for TCP Header Compression? [yes]:no

Configure for routing updates on async links? [no]:

For additional information on configuring SLIP and PPP connections, see the

section "Asynchronous Protocols" in the appendix "Internetworking Primer."

Enter yes or press Return at the AppleTalk remote access prompt to configure for

Step 5

AppleTalk, and then enter the AppleTalk network address and zone name for your

AppleTalk clients.

Configure for Appletalk Remote Access? [yes]:

AppleTalk Network for ARA clients [1]: 99

Zone name for ARA clients [ara-dialins]:

ARA protocol uses an internal nonextended unique network number, and a zone

name for ARA protocol clients. For additional information on configuring ARA

protocol, see the section "Asynchronous Protocols" in the appendix

"Internetworking Primer."

Configuring the Cisco 2500 Series Access Server 4-13

Configuring the Access Server