Cisco 2525 Підготовка до встановлення - Сторінка 6

Переглянути онлайн або завантажити pdf Підготовка до встановлення для Мережевий маршрутизатор Cisco 2525. Cisco 2525 19 сторінок. Troubleshooting guide
Також для Cisco 2525: Посібник з конфігурації (23 сторінок), Посібник з конфігурації (23 сторінок), Огляд (10 сторінок), Посібник з усунення несправностей (4 сторінок)

Installation Checklist

The router's AC power supply includes the following features:

•

Autoselects either 110V or 220V operation.

•

All units include a 6-foot (1.8-meter) electrical power cord. (A label near the power cord

indicates the correct voltage, frequency, current draw, and power dissipation for the

unit.)

Warning

protection. Ensure that a fuse or circuit breaker no larger than 120 VAC, 15A U.S.

(240 VAC, 10A international) is used on the phase conductors (all current-carrying

conductors). (To see translated versions of this warning, refer to the appendix "Translated

Safety Warnings.")

The Cisco 2524 offers a direct current (DC) power supply. See the section "DC Power

Specifications" in the chapter "Installing the Cisco 2524 and Cisco 2525 Routers" for more

information.

Installation Checklist

The Installation Checklist lists the procedures for initial hardware installation of a new

router. Make a copy of this checklist and mark the entries as you complete each procedure.

Include a copy of the checklist for each system in your Site Log. (See the next section,

"Creating a Site Log.")

2-6 Cisco 2524 and Cisco 2525 Router User Guide

This product relies on the building's installation for short-circuit (overcurrent)