Cisco 5100 Посібник з встановлення обладнання - Сторінка 24
Переглянути онлайн або завантажити pdf Посібник з встановлення обладнання для Мережевий маршрутизатор Cisco 5100. Cisco 5100 32 сторінки. Enterprise network compute system
Також для Cisco 5100: Підготовка до встановлення (6 сторінок)
Grounding the Chassis
Figure 8: Wall Mounting the Server
Step 2
Fix the chassis to the wall using the brackets that you attached to the device.
The screws for attaching the device to the wall are not provided with the kit. Depending on the type of wall (wood, brick,
stone etc), use appropriate screws to fix the device to the wall.
Route the cables so that they do not put a strain on the connectors or mounting hardware. You can only mount
Note
chassis with ports going out in left or right direction. Do not mount the chassis with ports facing upward or
downward direction.
Grounding the Chassis
Warning
This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the absence
of a suitably installed ground conductor. Contact the appropriate electrical inspection authority or an electrician
if you are uncertain that suitable grounding is available. Statement 1024
These are the steps to install the ground connection for the device:
Cisco 5100 Enterprise Network Compute System Hardware Installation Guide
18
Installing the Device