ACDC Motorized Solutions RollerGlide Посібник користувача - Сторінка 7
Переглянути онлайн або завантажити pdf Посібник користувача для Відкривач гаражних дверей ACDC Motorized Solutions RollerGlide. ACDC Motorized Solutions RollerGlide 8 сторінок. Rollerglide rolling door operator
Друкувати сторінкуACDC Motorized Solutions Pty. Ltd.
RollerGlide Rolling Door Operator
RollerGlide Specifications
Manufactured to ISO 9001
Electrical
Power fuse: 1A 240V
Power supply: 240V AC 50HZ 100W
Power input: Standard power socket with unplugable lead
Power transformer: Output 24V AC with thermal overload protection
Courtesy light: 15W/240V
Motor: High torque 24V DC with enclosed Hall Effect sensor
Mechanical
Overhead height: 3.0m (maximum)
Width: 5.0m (maximum)
Suitability: Spring balanced roller doors
Maximum lifting capacity: 250N
Reel diameter: 270mm
Operating speed: 8m/min
Weight of main unit: 7.5Kg
Dimension: 200×260×480mm
Controls
Service lever for manual operation during power disruption
Two encoded wireless remote controls
Provision for using a press button switch
Photoelectric power connection and input, fail-safe
Adjustable bi-directional obstruction detection
Adjustable open and close fail-safe limit switches
Service help
Following this guide may resolve your service problem
Obvious problems are not included.
Door won't open/close fully
If the door fails to fully open or close fully it may be jammed, pull the service lever to
disengage the motor drive and operate the door manually to check.
If the opening or closing error is only a small distance it may require the limit switches
to be adjusted see Setting limit switches (page 3)
Not operating with the remote control.
Try a second remote control and if still not working remove the white plastic light
diffuser and operate it with the control panel buttons located on the blue control panel
at the bottom of the control board.
If this operates correctly erase the existing remote controls and add them again
See page 1 Adding extra remote controls
7
Rev.1 March 2008