C.T.M. HS-686 Інструкція з експлуатації - Сторінка 14
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Скутер C.T.M. HS-686. C.T.M. HS-686 19 сторінок. 6-series
Друкувати сторінку
- 1. Table of Contents
- 2. Introduction
- 3. Important Precautions
- 4. Electromagnetic Interference and Warnings
- 5. Identification of Parts
- 6. Operating Your Scooter
- 7. Assembling Your Scooter
- 8. Disassembling Your Scooter
- 9. Charging the Batteries
- 10. Care and Maintenance
- 11. Troubleshooting
- 12. Technical Specifications
6-Series
Rear Shroud is removable by lifting the Rear Shroud up. (See Fig. 16)
Disconnect Wire Harness. (See Fig. 17)
Release two Guide Pins to separate Front and Rear Sections. (See Fig. 18)
With one hand on rear frame and other on seat post as handheld, detach Front and Rear
Sections. (See Fig. 19)
By removing the front basket and adjusting the tiller down by using the Tiller Angle
Adjustment Lever you should be able to place all parts in the trunk and part of the Rear
Seat.(See Fig. 20 & 21 & 22)
Figure 20
Figure 20
Figure 16
Figure 16
Figure 18
Figure 18
Figure 21
Figure 21
12
Instruction Booklet
Figure 17
Figure 17
Figure 19
Figure 19
Figure 22
Figure 22