Samsung 29Z47 Посібник користувача - Сторінка 3
Переглянути онлайн або завантажити pdf Посібник користувача для ТЕЛЕБАЧЕННЯ Samsung 29Z47. Samsung 29Z47 9 сторінок.
Viewing the Menus
1
Press the MENU button.
The main menu is displayed on the screen. Its left side
has five icons: Input, Picture, Sound, Channel, and
Setup.
Press the ... or † button to select one of the icons.
2
Press the ENTER button to access the icon's sub-menu.
Press the ... or † button to move to items in the menu.
3
Press the ENTER button to enter items in the menu.
Press the .../†/œ/√ button to change the selected
4
items. Press the MENU button to return to the previous
menu.
5
Press the EXIT button to exit from the menu.
Setup - Plug & Play
When the television is initially powered on, several basic
customer settings proceed automatically and subsequently.
The following settings are available.
1
If the television is in standby
mode, press the POWER
Start Plug & Play.
button on the remote
control.
Enter
The Start Plug & Play
is displayed. To start Plug &
Play, press the ENTER
Language
button. The Language
English
menu is displayed.
Indonesia
➢
Melayu
The Language menu
will automatically
appear after several
Move
seconds, even if the
ENTER button is not pressed.
2
Select the appropriated
language by pressing the ...
Check antenna input.
or † button. Press the
ENTER button.
Enter
The Check antenna
input. is displayed.
➢
If any language is not selected, the language menu
will disappear about 30 seconds later.
Press the ... or † button to
3
select your area. Press the
ENTER button.
4
To search the channels,
press the ENTER button. To
stop the search, press the
ENTER button.
When the channel
searching has finished, the
Clock Set menu is
displayed.
Press the œ or √ button to
5
move to the hour or minute.
Set the hour or minute by
pressing the ... or † button.
6
When you have finished,
press the MENU button.
The Enjoy your
watching. is displayed, and then the channel which
has been stored will be activated.
Re-setting the Plug & Play
Method: MENU ➜ ... ... /† †
(Setup) ➜ ENTER ➜ ... ... /† †
(Plug & Play) ➜ ENTER
Plug & Play
OK
Return
Plug & Play
Enter
Skip
Plug & Play
OK
Skip
continued...
Plug & Play
Auto Store
Start
Enter
Skip
Plug & Play
Auto Store
P 1
102MHz
7 %
Stop
Enter
Skip
Plug & Play
Clock Set
11:00
am
Move
Enter
Adjust
Skip
Enjoy your watching.
OK
Setup
TV
√ √
Plug & Play
√ √
Language
: English
√ √
Time
√ √
Child Lock
√ √
Blue Screen
: On
Move
Enter
Return
English - 3
Input
-
(depending on the model)
Source List
◆ Source List
TV
You can switch between
TV
AV1
viewing signal from
AV2
connected equipment, such
S-Video
as a VCR, DVD, set-top box,
Component
and the TV source
(broadcast or cable).
➢
Move
You can change the
required external source simply by pressing the
SOURCE button on the remote control. It might take
a short period of time for pictures to be switched. To
return to the TV mode, press the TV button on the
remote control.
Channel - Auto Store
You can scan for the frequency ranges available to you (and
availability depends on your country). Automatically allocated
programme numbers may not correspond to actual or
desired programme numbers. However you can sort
numbers manually and clear any channels you do not wish
to watch.
When finished, the Sort menu
P 1
is displayed. To sort the stored
channels into the desired
numerical order, refer to
"Channel - Sort". To exit without
Enter
sorting, press the EXIT button.
Source List
Enter
Return
Search
102MHz
7 %
Stop
Return