Cisco NCS 6008 Посібник з розпакування, переміщення та кріплення - Сторінка 13
Переглянути онлайн або завантажити pdf Посібник з розпакування, переміщення та кріплення для Мережевий маршрутизатор Cisco NCS 6008. Cisco NCS 6008 44 сторінки. 6000 series network convergence system routers unpacking, moving, and securing guide
Також для Cisco NCS 6008: Посібник (12 сторінок)
Друкувати сторінку
Chapter 1
•
Both configurations are acceptable to transport the as-shipped chassis.
Note
The optional NCS 6008 lift dolly is available from Cisco with PID NCS-LIFT. If you already have a CRS
lift dolly, you can order PID NCS-LIFT-BRKT, which is the CRS lift upgrade to the NCS 6008.
Table 1-2
Table 1-2
Specification
Weight (each component)
Maximum recommended safe
curb height
Unpacking the Dolly
We recommend the use of the dolly to move the chassis. The dolly is an optional item that you can order.
The shipping crate contains the dolly units, positioned in the 90-degree configuration
section describes how to unpack and position the dolly units.
In the event that the dolly supplied by Cisco is not the appropriate method of transportation, consult with
Note
Cisco support to determine a method of transportation appropriate for the site. Ensure that the alternate
moving device is capable of supporting the weight of the chassis, moving the chassis safely, and
preventing the chassis from tipping too far and falling during transport.
Required Tools and Equipment
•
•
•
Steps
Carefully move the pallet containing the dolly to the location where you plan to unpack it. The dolly
Step 1
arrives as two separate, identical units, one unit each for the front and back of the chassis.
Use the flat-blade screwdriver to remove the clip from the dolly shipping crate
Step 2
OL-29233-01
180-degree configuration—This configuration is a more stable configuration for transporting the
chassis. The 180-degree position
chassis.
lists the specifications for the NCS 6008 lift dolly.
NCS 6008 Lift Dolly Specifications
3/8-inch ratchet wrench
5/8-inch socket
Flat-blade screwdriver
Cisco Network Convergence System 6000 Series Routers Unpacking, Moving, and Securing Guide
(Figure
1-6) is the recommended configuration for moving the
Value
126.0 lb (57 kg)
1.5 in. (3.8 cm)
Dolly Specifications
(Figure
1-3). This
(Figure
1-2).
1-5