Cisco Nexus 5000 Series Довідковий посібник - Сторінка 7

Переглянути онлайн або завантажити pdf Довідковий посібник для Мережевий маршрутизатор Cisco Nexus 5000 Series. Cisco Nexus 5000 Series 12 сторінок. Configuring ip source guard
Також для Cisco Nexus 5000 Series: Примітка до випуску (26 сторінок), Короткий довідник (14 сторінок), Примітка до випуску (26 сторінок), Посібник з усунення несправностей (8 сторінок), Посібник (11 сторінок), Посібник (6 сторінок), Посібник (7 сторінок), Посібник з експлуатації (45 сторінок), Посібник з конфігурації (6 сторінок)

NX-API Request Element

type

chunk

Description

Specifies the type of command to be executed.

The following types of commands are supported:

• cli_show

CLI show commands that expect structured output. If the command does

not support XML output, an error message is returned.

• cli_show_ascii

CLI show commands that expect ASCII output. This aligns with existing

scripts that parse ASCII output. Users are able to use existing scripts

with minimal changes.

• cli_conf

CLI configuration commands.

• Each command is only executable with the current user's

Note

authority.

• The pipe operation is supported in the output when the message

type is ASCII. If the output is in XML format, the pipe operation

is not supported.

• A maximum of 10 consecutive show commands are supported.

If the number of show commands exceeds 10, the 11th and

subsequent commands are ignored.

• No interactive commands are supported.

Some show commands can return a large amount of output. For the NX-API

client to start processing the output before the entire command completes,

NX-API supports output chunking for show commands.

Enable or disable chunk with the following settings:

Do not chunk output.

Chunk output.

Note

Only show commands support chunking. When a series of show

commands are entered, only the first command is chunked and

returned.

The output message format is XML. (XML is the default.) Special

characters, such as < or >, are converted to form a valid XML message

(< is converted into < > is converted into &gt).

You can use XML SAX to parse the chunked output.

Note

When chunking is enabled, the message format is limited to XML.

JSON output format is not supported when chunking is enabled.