Cisco RV120W Посібник

Переглянути онлайн або завантажити pdf Посібник для Мережевий маршрутизатор Cisco RV120W. Cisco RV120W 2 сторінки. Factory reset and reboot
Також для Cisco RV120W: Посібник із швидкого старту (21 сторінок), Посібник із швидкого старту (2 сторінок)

Factory Reset and Reboot on RV120W and

RV220W

Objective

The router can be set to factory default if the Reset button on the router is pressed or

through the web configuration utility on the router. Press the Reset button on the back of the

router for 8 seconds to reset your router to its factory default settings. Any settings on the

router will be erased and the router IP address will become "192.168.1.1". Both the

username and the password will be "cisco".

Reboot is a soft operation which a user might need to use if there is a problem with software

or hardware. Reboot is handled by software and happens in automatic mode. Reset on the

other hand is a rough operation which a user might need when the device cannot restart or

be turned off.

This article explains how to reset your device through the reset button and also through the

configuration utility.

Applicable Devices

• RV120W

• RV220W

Software Version

• v1.0.4.17

Functions of the Reset Button

The button has two functions:

• Reboot — Press the button for at least 3 seconds but no more than 8 seconds.

• Reset — Press and hold in the button for more than 8 seconds. This resets the unit and

restores the factory defaults.

Reset the Router with the Reset Button

Note: Take note of the current settings of the device before resetting.

Resetting through Reset button can be done in two ways:

1. Press the Reset button of the router for 8 seconds. All the display LEDs light up to

indicate the start of the reset process.

2. If the normal reset does not work, unplug the power adapter and then plug it back in while

you press the Reset button.