Cisco SG 300-10P Посібник з швидкого налаштування - Сторінка 9

Переглянути онлайн або завантажити pdf Посібник з швидкого налаштування для Мережевий маршрутизатор Cisco SG 300-10P. Cisco SG 300-10P 10 сторінок. Managed switches
Також для Cisco SG 300-10P: Посібник із швидкого старту (17 сторінок), Технічний паспорт (14 сторінок), Технічні характеристики (2 сторінок), Посібник із швидкого старту (18 сторінок), Посібник із швидкого старту (17 сторінок), Посібник із швидкого старту (17 сторінок)

Cisco Ethernet Switch Quick Setup Guide

Preparing for System Installation

The Ethernet Switch is now properly configured to support MuxLab AV over IP devices

with respect to IGMP and Jumbo Frames.

Note that MuxLab AV over IP Transmitters and Receivers are set by default with DHCP

enabled, and the MuxLab 500811 ProDigital Network Controller has DHCP disabled by

default and is set to a Static IP address of 192.168.168.50. It is recommended that you

operate your system with the Transmitters and Receivers with DHCP enable and the

500811 Network Controller with DHCP disabled.

If however you intend to disable the DHCP on the Transmitters and Receivers, then

please take note that the default Static IP address for the Transmitters is

192.168.168.55, and for the Receivers is 192.168.168.56.

Note that in order for the entire system to operate correctly, the Ethernet Switch,

MuxLab Transmitters and Receivers, and the MuxLab ProDigital Network Controller

must all be on the same subnet. Devices with DHCP enabled will adjust automatically to

the correct subnet, while devices with DHCP disabled, may need to be set by the user to

the correct subnet, if not already set correctly. Your network administrator can assist with

this configuration if you are not familiar with how to accomplish this task.

If you are having issues which require further assistance, please contact the respective

device manufacturer for the device in question. For MuxLab device related questions,

please contact MuxLab Customer Technical Support at 877-689-5228 (toll-free in North

America) or (+1) 514-905-0588 (International).