CAB MAESTRO 3E/600 Посібник оператора - Сторінка 7

Переглянути онлайн або завантажити pdf Посібник оператора для Системи фільтрації води CAB MAESTRO 3E/600. CAB MAESTRO 3E/600 14 сторінок. Pcb separator

Друкувати сторінку

Installation

3.1

Unpacking and Setting-up the Device

 Lift the device out of the box.

 Check device for damage which may have occurred during transport.

 Set up device on a level surface.

 Check delivery for completeness.

Contents of delivery:

•

PCB Separator

•

Documentation

•

Allen key 2 mm

•

optional : Dial Gauge Assy. (Part No. 8970208) to check the alignment of the blades

Notice!

 Please keep the original packaging in case the device must be returned.

Attention!

The device and printing materials will be damaged by moisture and wetness.

 Set up the device only in dry locations protected from splash water.

3.2

Earthing Connection

Fig. 3

Earthing Connection

Attention!

Hazard by electrical charge !

 Provide an earthing connection via press stud (1).

3.3

Releasing the Upper Blade Lock

Fig. 4

Releasing the Upper Blade Lock

To avoid possible damage during transportation, the blade carrier (3) is fi xed by a screw (2 / incl. washer) on the

frame (1).

 Loosen the screw (2) before operation.

Warning!

Risk of injury !

 When moving the machine, or when it is to be dispatched elsewhere the screw (2) has to be tighten.