3Com 3041E Посібник для початківців - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник для початківців для Мережевий маршрутизатор 3Com 3041E. 3Com 3041E 17 сторінок. 3000 adsl2 plus family

Друкувати сторінку

3Com Router 3000 ADSL2+ Family Getting Started Guide

LEDs

LED

LAN1/LAN2/LAN3/LAN4

DSL LNK

DSL ACT

ISDN LNK

ISDN ACT

SYS

PWR

Console port

Attribute

Connector

Interface standard

Baud rate

Service

Ethernet interface

Attribute

Connector

Interface type

Operating mode

OFF means no link is present.

Steady ON means a link is present.

Blinking means the interface is sending and/or

receiving data.

OFF means no ADSL/ADSL2/ADSL2+ line is activated.

Steady ON means the ADSL/ADSL2/ADSL2+ line is

activated.

Blinking means the connected two parties are

negotiating parameters.

OFF means no data is being sent or received.

Blinking means the interface is sending and/or

receiving data.

OFF means the ISDN link is not activated.

ON means the ISDN link has been activated.

OFF means no data is being sent or received on the

ISDN link.

Blinking means data is being sent and/or received on

the ISDN link.

Blinking means the system is operating normally.

Steady ON or OFF means the system is improperly

operating.

OFF means no power is being supplied.

Steady ON means power is being supplied.

RJ45

Asynchronous RS232

9600 (default) to 115200 bps

Connection to an ASCII terminal

Connection to the serial interface on a PC to run the

terminal emulation program on the PC

Command line interface (CLI)

Auxiliary (AUX) port

10BASE-T

RJ45

MDI/MDIX auto-sensing

10 Mbps

Full duplex/half duplex

Description

10/100BASE-T

10/100 Mbps auto-sensing

Full duplex/half duplex

Supports only L2 switching