Cisco WUMC710 Посібник користувача - Сторінка 10

Переглянути онлайн або завантажити pdf Посібник користувача для Мережевий маршрутизатор Cisco WUMC710. Cisco WUMC710 17 сторінок. 802.11ac
Також для Cisco WUMC710: Посібник користувача (17 сторінок), Посібник зі швидкого встановлення (17 сторінок)

Linksys WUMC710

Key 1

Enter the WEP key of your network

Tx Key

Key 1 is the transmit key used by the bridge

Authentication

The default is Auto, which allows either Open system or Shared

key authentication to be used Select Open to use open system authentication;

the sender and recipient do not use a WEP key for authentication Select

Shared to use shared key authentication; the sender and recipient use a WEP

key for authentication

Click Save Settings to apply your changes, or click Cancel Changes to cancel

your changes

Wi-Fi Protected Setup

There are two methods available Use the method that applies to the router

you are using

Method #1

Use this method if your router has a Wi-Fi Protected Setup button

1. Click or press the Wi-Fi Protected Setup button on the router

2. Within two minutes, click the Wi-Fi Protected Setup button on the

bridge's Wi-Fi Protected Setup screen

3. After the bridge has been configured, click Close

The Wi-Fi Protected Setup screen displays the Link Status, Network Name (SSID),

and Security method

Method #2

Use this method if your router requests the PIN number of the bridge

1. On the router's Wi-Fi Protected Setup screen, enter the PIN number on

the bridge's Wi-Fi Protected Setup screen Then click Register or the

appropriate button (It is also listed on the label on the bottom of the

bridge )

2. On the bridge's Wi-Fi Protected Setup screen, click OK

3. After the bridge has been configured, click Close

The Wi-Fi Protected Setup screen displays the Link Status, Network Name (SSID),

and Security method

Wireless > Wireless Network Site Survey

Click the Wireless Network Site Survey tab to begin a site survey The Wireless

Network Site Survey screen lists the wireless networks detected by the bridge

Advanced Configuration