Cisco XR 12416 Інструкція з перепакування - Сторінка 6
Переглянути онлайн або завантажити pdf Інструкція з перепакування для Мережевий маршрутизатор Cisco XR 12416. Cisco XR 12416 26 сторінок. Cisco systems router owner's manual
Також для Cisco XR 12416: Посібник з монтажу (41 сторінок)
Друкувати сторінкуRepackaging the Routers
Tools and Equipment
Safety Recommendations
Cisco XR 12416 and Cisco XR 12816 Router Chassis Installation Guide
A-6
You need the following items to remove the router from the equipment rack and
repackage it for shipping:
ESD-preventive wrist strap
•
•
Flat-blade screwdrivers
Number 1 and number 2 Phillips screwdrivers
•
3/8-inch (10-mm) nutdriver (for systems equipped with the DC-input power
•
shelf)
9/16-inch (14-mm wrench) wrench
•
•
3/4-inch (19-mm) socket and ratchet wrench
Safety hand truck with retractable safety leg wheels and security strap, such
•
as the Stevens Appliance Truck Company "Escort," Model STEV SRT-M-66
(distributed by McMaster-Carr as Model 2654T6), or an equivalent safety
hand truck.
Antistatic sacks or other ESD-preventive storage environment
•
The original router shipping package supplied by Cisco. If you do not have
•
the original router shipping package, contact your Cisco service
representative for assistance.
Before you begin the procedures in this appendix, review the following safety
information:
The safety recommendations listed in
•
on page 2-2
in
Chapter 2, "Preparing for Installation."
The safety warnings listed in the publication Regulatory Compliance and
•
Safety Information for the Cisco 12000 Series Internet Router that
accompanied your router
Appendix A
Repackaging the Router
the"Safety Recommendations" section
OL-17440-01