Epson V11H128020 - PowerLite S1 SVGA LCD Projector Посібник з швидкого налаштування - Сторінка 2
Переглянути онлайн або завантажити pdf Посібник з швидкого налаштування для Проектор Epson V11H128020 - PowerLite S1 SVGA LCD Projector. Epson V11H128020 - PowerLite S1 SVGA LCD Projector 7 сторінок. Epson powerlite elpmbuni: installation guide
Також для Epson V11H128020 - PowerLite S1 SVGA LCD Projector: Технічні характеристики (2 сторінок), Інформаційний посібник про продукт (15 сторінок), Посібник з монтажу (19 сторінок)
Друкувати сторінку
2
Connect your video source
The projector has 3 video connectors, as shown below. Each one
requires a different type of cable. A computer cable is included.
You can purchase optional video cables through EPSON or at local
electronics stores. You can connect up to 3 video devices and
use the remote control to switch among them.
1
Check the connectors on your video equipment. If more than one
connection is available, choose the one that provides the best
quality. (The projector connectors from highest to lowest quality
are Computer/Component, S-Video, and Composite Video.)
2
Make sure you have the right cable(s) for the connection(s) you
want to use, and the cables are long enough for your setup.
If you need a cable longer than the standard 6 to 10 feet, you
may need a distribution amplifier.
3
Before you connect your equipment, make sure everything
is turned off.
4
Connect your video equipment to the projector.
S-Video cable
NOTE
To play back audio through the projector, you can connect an audio
cable from your video device to the audio in ports on the projector.
See the User's Guide on your CD-ROM for instructions.
3
Set up the remote control
Pull out the insulating tape to remove it
from the battery holder.
The remote control
is ready for use.
NOTE
To use the projector's wireless mouse function, you'll need to use
the presentation remote control and receiver. See the User's Guide
on your CD-ROM for instructions.
RCA video cable
(composite video)
Computer /
S-Video
Video
Component video
L – Audio – R
Control (RS-232C)
Component video
to VGA cable
or VGA computer
cable
Monitor Out
Computer cable
(included)