Epson V11H179020 - PowerLite S3 SVGA LCD Projector Інформація про продукт - Сторінка 4
Переглянути онлайн або завантажити pdf Інформація про продукт для Проектор Epson V11H179020 - PowerLite S3 SVGA LCD Projector. Epson V11H179020 - PowerLite S3 SVGA LCD Projector 15 сторінок. Supplemental / late breaking information
Також для Epson V11H179020 - PowerLite S3 SVGA LCD Projector: Технічні характеристики (2 сторінок), Посібник з монтажу (19 сторінок), Посібник з швидкого налаштування (7 сторінок), Технічні характеристики (1 сторінок)
Друкувати сторінку
Epson PowerLite S3 Projector
Turning the Projector On and Off
Once you've connected the projector to your computer or other
equipment, follow these instructions to turn it on and display
an image:
1. Make sure the power is turned off for the projector and any
sources connected to it.
2. Remove the lens cover.
3. Connect the power cord to the projector and plug the other
end into a standard electrical outlet.
Connect power cord
The P
light on the projector turns orange, indicating
Power
that the projector is receiving power, but is not yet turned
on.
Orange
Note: The projector will not respond to any buttons on the
control panel or remote control while the power light is
flashing orange.
4. If you are connecting to a device other than a computer, turn
on your equipment. (If you are connecting to a computer,
don't turn it on yet.)
4 - Epson PowerLite S3 Projector
5. Press the P
Power
of the projector to turn on the projector.
Power button
You hear a beep, the P
projector warms up, and the projection lamp comes on in
about 5 seconds.
Note: You may see a blue screen with the
displayed. This is normal.
6. If you are using a computer, turn it on now.
7. Start your video or presentation. If you have connected more
than one video or computer source, you may need to press
the
or
Computer
S-Video/Video
control or the
Source
one you want to watch. (See "Switching Between Picture
Sources" on page 6 for more information.)
If the image is upside-down or reversed, you need to turn on
the
,
, or
Rear
Ceiling
menu.
If a projected image fails to appear, see "Troubleshooting"
on page 5.
Once you see your image, see page 6 for instructions on
focusing and making other image adjustments.
Turning Off the Projector
When you're ready to shut down the projector, follow these
steps:
1. Turn off any video or computer sources connected to the
projector first.
2. Press the P
Power
control to turn off the projector.
You see a confirmation message:
If you don't want to turn it off,
press any button or ignore the
message. (It disappears in about
7 seconds.)
3/05
button on the remote control or the top
light flashes green as the
Power
No Signal
button on the remote
button on the projector to select the
option in the Setting
Rear/Ceiling
button on the projector or remote
message