Epson V11H179020 - PowerLite S3 SVGA LCD Projector Посібник з швидкого налаштування - Сторінка 4
Переглянути онлайн або завантажити pdf Посібник з швидкого налаштування для Проектор Epson V11H179020 - PowerLite S3 SVGA LCD Projector. Epson V11H179020 - PowerLite S3 SVGA LCD Projector 7 сторінок. Supplemental / late breaking information
Також для Epson V11H179020 - PowerLite S3 SVGA LCD Projector: Технічні характеристики (2 сторінок), Інформація про продукт (15 сторінок), Посібник з монтажу (19 сторінок), Технічні характеристики (1 сторінок)
4
Plug in and turn on
1
Press in the tabs and remove the lens cover.
2
Connect the power cord to the projector and plug
the other end into an electrical outlet.
The
3
If you are connecting a device other than a computer,
turn on your equipment. (If you are connecting to a
computer, don't turn it on yet.)
4
Press the
You hear a beep, the
projector lamp comes on in about 6 seconds. The
light stays green.
5
If you are using a computer, turn it on now.
6
Start your video or presentation. If you have
connected more than one video source, press
the Computer or S-Video/Video button on the
projector remote control to select the one you
want to watch.
NOTE
If you connected a notebook
computer and no image is being
projected, you may need to set up
the notebook to output signals
externally. See the Troubleshooting
section for instructions.
Turning off the projector
1
When you're finished using the projector, first turn off the
video source.
2
Press the
3
When you see the confirmation message, press the
button again. The
cools down.
4
When the
Caution:
Never unplug the projector when the
flashing orange.
power light turns orange.
Power button on the projector or remote control.
Power button on the projector or remote control.
power light flashes orange as the projector
power light is a steady orange, unplug the projector.
power light flashes green, and the
Source buttons
power
Power
power light is green or