Cisco 7200 VXR Series Посібник - Сторінка 11
Переглянути онлайн або завантажити pdf Посібник для Бездротова точка доступу Cisco 7200 VXR Series. Cisco 7200 VXR Series 14 сторінок. Preparing for installation
Також для Cisco 7200 VXR Series: Технічний паспорт (12 сторінок), Посібник із швидкого старту (48 сторінок)
Друкувати сторінку
Chapter 2
Preparing for Installation
Cisco 7200 VXR Router Installation Checklist
Table 2-2
Cisco 7200 VXR Router Installation Checklist
Task
Verified By
Date
Date router received
Router and all accessories unpacked
Types and numbers of interfaces verified
Safety recommendations and guidelines reviewed
Installation Checklist copied
Site log established and background information entered
Site power voltages verified
Site environmental specifications verified
Required passwords, IP addresses, device names, and so on, available
Required tools available
Network connection equipment available
Router mounted in rack (optional)
Cable-management brackets installed (optional but recommended)
AC power cable(s) connected to AC source(s) and router; retention clip secured
DC power cable(s) connected to DC source(s) and router
Captive installation screws on I/O controller and network processing engine or network services
engine checked
Network interface cables and devices connected
ASCII terminal attached to console port
Console port set for 9600 baud, 8 data bits, no parity, and 2 stop bits (9600 8N2)
System power turned on (DC OK LED is on)
System boot complete (I/O controller enabled LED is on)
I/O controller, network processing engine or network services engine, and all port adapters
operational (enabled LEDs on the port adapters and the I/O controller are on)
Correct hardware configuration displayed after system banner appears
System ready for global and interface-specific configuration
Cisco 7200 VXR Installation and Configuration Guide
2-11
OL-5013-09