Cisco AIR-AP1210 - Aironet 1200 - Wireless Access Point External Посібник користувача - Сторінка 2
Переглянути онлайн або завантажити pdf Посібник користувача для Бездротова точка доступу Cisco AIR-AP1210 - Aironet 1200 - Wireless Access Point External. Cisco AIR-AP1210 - Aironet 1200 - Wireless Access Point External 36 сторінок. Aironet 1100/1200 series
Також для Cisco AIR-AP1210 - Aironet 1200 - Wireless Access Point External: Інструкція з оформлення замовлення (6 сторінок)
Друкувати сторінку
Introduction
The Cisco Aironet IEEE 802.11g-compliant radio (hereafter called the
802.11g radio) is designed to upgrade 1100 and 1200 series access points to
IEEE 802.11g standards. The radio delivers 100 milliwatts (mW) maximum
transmit power at 1, 2, 5.5, and 11 megabits per second (Mbps) data rates and
30 mW maximum at all other data rates. The radio supports data rates of up
to 54 Mbps.
This guide provides instructions for installing or replacing an 802.11g radio
in an 1100 or 1200 series access point. The following operations summarize
the upgrade procedure:
1. Remove all cables and power connections from the access point.
2. Follow standard electrostatic discharge (ESD) procedures.
3. Place the access point on an ESD-protected work surface.
4. Open the access point's radio access cover.
5. Install the new 802.11g radio card.
6. Close the access point's radio access cover.
2