Cisco AIR-LAP1310G Інструкція з монтажу - Сторінка 13

Переглянути онлайн або завантажити pdf Інструкція з монтажу для Бездротова точка доступу Cisco AIR-LAP1310G. Cisco AIR-LAP1310G 40 сторінок. Cisco aironet 1300 series lightweight outdoor access point

Друкувати сторінку

1. Mounting the Access Point

Wall or Ceiling Mounting Bracket

The access point supports a wall or ceiling mounting bracket that can be used only with the external

antenna access point unit (see

Installing the access point on a wall or ceiling includes the following subtasks:

Figure 2

Mounting the Access Point

To mount the external antenna access point unit using the wall or ceiling mounting bracket, follow these

steps:

Step 1

Choose a mounting location for the access point. For more information, see

Location" section on page

Find a solid mounting position for the mounting bracket, such as a stud or main building member on a

Step 2

building wall or ceiling. It may be necessary to utilize a stud finder to find a wooden structural member.

Place the mounting bracket on the access point as shown in

Step 3

has an opening that corresponds to the shape of the access point with a flat cut-out segment that

corresponds to the access point connector area.

Note

78-17634-01

Mounting the unit

Routing the cables (normal)

Activating the link

Access Point with Wall or Ceiling Mounting Bracket

The bracket support feet must be positioned towards the front of the access point.

Cisco Aironet 1300 Series Lightweight Outdoor Access Point Mounting Instructions

Figure

2). The bracket can be used indoors only.

Mounting the Access Point

"Choosing a Mounting

Figure 2

and snap into position. The bracket