Cisco aironet 1130 Посібник з конфігурації - Сторінка 14
Переглянути онлайн або завантажити pdf Посібник з конфігурації для Бездротова точка доступу Cisco aironet 1130. Cisco aironet 1130 40 сторінок. Wlc (wireless lan controller), wism (wireless services module) integrated wlc with aps
Друкувати сторінку10. Set the
11. The handsets do not support dynamic power and will not utilize the
12. In the navigation pane under
13.
14. Click the
15. In the navigation pane under
16.
17.
14
802.11
Radio Standard
802.11b
802.11g
802.11a
For additional details on RF deployment please see the Deploying
Enterprise-Grade Wi-Fi Telephony white paper and the Best
Practices Guide for Deploying SpectraLink 8020/8030 Wireless
Telephones.
9. Use the default
Fragmentation Threshold
Beacon Period
information element that is set when DTPC Support is enabled. The
handset power should be configured to match the highest transmit
power of the APs. Click the
Select
SpectraLink Voice Priority
Apply
button to save the settings.
Enable
802.11b/g Network Status
Wireless Telephones are configured for 802.11b & b/g mixed mode.
Click the
Apply
button to save the settings.
VIEW Certified Configuration Guide
Minimum Available
Signal Strength (RSSI)
-70 dBm
-60 dBm
-63 dBm
-47 dBm
-60 dBm
-45 dBm
(2346 bytes).
to
.
100
Apply
button to save the settings.
802.11b/g/n,
from the drop-down list.
802.11b/g/n,
and
802.11g Support
Maximum
"Mandatory" Data Rate
1 Mb/s
11 Mb/s
6 Mb/s
54 Mb/s
6 Mb/s
54 Mb/s
select
EDCA Parameters.
select
Network.
if SpectraLink
PN: 1725-36192-001_H