DigitaLinx DL-HD2100 Посібник зі швидкого встановлення - Сторінка 2
Переглянути онлайн або завантажити pdf Посібник зі швидкого встановлення для Подовжувач DigitaLinx DL-HD2100. DigitaLinx DL-HD2100 8 сторінок. Hdbaset extender set
Також для DigitaLinx DL-HD2100: Посібник користувача (17 сторінок), Посібник зі швидкого встановлення (8 сторінок)
Друкувати сторінку
The DigitaLinx DL-HD2100 HDBaseT extender set extends HDMI audio, video as well as control
up to 100m / 330' using a single Category 6 cable. Supports HDMI 2.0b, HDR10 and HDCP 2.2
as well as Dolby Atmos and DTS:X audio formats. Control extension supports bidirectional IR,
Ethernet, ARC and RS232.
The DigitaLinx DL-HD2100 can transport HDMI data rates up to 18Gbps up to 100 meters.
The system enables high data rates by utilizing visual lossless compression at a 2:1 data
compression rate when the signal surpasses 10Gbps, anything under 10Gbps will never be
compressed.
Built-in surge protection and diagnostic LEDs ensure hassle-free and robust installations.
Flexible power design allows the units to be powered at either the TX or RX end, and only
one power supply is required to power the set. The 12 volt power supply is secured with a
screw-on connector to prevent the power from being accidentally disconnected.
The DL-HD2100 is sold only as a set. The individual transmitter and receiver are not compatible
with other HDBaseT devices due to proprietary PoE circuitry.
• (1) DL-HD2100 Transmitter
• (1) DL-HD2100 Receiver
• (2) IR Receivers (Eye)
• (2) IR Transmitters (Emitter)
• (1) IR-AC IR Coupler Cable
• (3) 3 pole Terminal Block (attached to extenders)
• (1) DC12v US Power Supply with US, UK, EU and AU adapters
• (4) Mounting Brackets with screws