Cisco Aironet 1300 Series Посібник із швидкого старту - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Бездротова точка доступу Cisco Aironet 1300 Series. Cisco Aironet 1300 Series 35 сторінок. Outdoor access point/bridge
Також для Cisco Aironet 1300 Series: Технічний паспорт (15 сторінок)
Друкувати сторінку
Enabling the Radio Interfaces
In Cisco IOS Release 12.3(4)JA and later, the access point/bridge radio is
disabled by default, and there is no SSID. You must create an SSID and
enable the radios before the access point/bridge will allow wireless
associations from other devices. These changes to the default configuration
improve the security of newly installed access point/bridges.
To enable the radio interfaces using the access point/bridge's graphical user
interface (GUI), follow these instructions:
1. Use your internet browser to access your access point. The default login
and password is Cisco. Both are case-sensitive.
2. When the Summary Status page displays, choose Express > SSID
Manager. The Global SSID Manager page appears.
3. Create an SSID for each radio interface. An SSID can be any
alphanumeric, case-sensitive entry from 2 to 32 characters. The
following six characters are not allowed: ?, ", $. [. \, and +. In addition,
the following three characters cannot be the first character: !, #, and ;.
4. Click Apply.
5. Choose Network Interface > Radio 802.11g and the Radio Status page
appears.
6. Click Settings and the Radio Settings Page appears.
7. Click Enable in the Enable Radio field.
Quick Start Guide Cisco Aironet 1300 Series Access Point
5