DigitaLinx DL-HDE100 Посібник зі швидкого встановлення
Переглянути онлайн або завантажити pdf Посібник зі швидкого встановлення для Подовжувач DigitaLinx DL-HDE100. DigitaLinx DL-HDE100 8 сторінок. Extender set transmits hdmi, bidirectional ir, rs232 and
ethernet up to 100 meters away using a single category 6 twisted pair cable.
Також для DigitaLinx DL-HDE100: Посібник з монтажу (4 сторінок), Посібник користувача (16 сторінок)
Друкувати сторінку
DL-HDE100 Quick Install Guide
For complete owners manual go to www.libav.com or use a QR reader to access the
Important notice:
• Do not attempt to disassemble or alter the housing. There are no user-serviceable parts
inside the unit. Doing so will void your warranty.
• To minimize the possibility of equipment damage from electrostatic discharge (ESD), all source and destination
equipment must be powered off during installation.
• Do not connect the device to a telecommunication outlet wired to unrelated equipment. Doing so may
damage the unit or any connected equipment. Ensure all connected twisted pair cabling is straight-through (point-
to-point).
• Allow proper ventilation to reduce the risk of thermal failure.
This guide is for quick installation only.
manual via QR code below.
Scan QR Code with your Smart-phone or Tablet