DigitaLinx DL-HDE100-H2 Посібник користувача - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник користувача для Подовжувач DigitaLinx DL-HDE100-H2. DigitaLinx DL-HDE100-H2 15 сторінок.

DL-HDE100-H2 Owners Manual

The DigitaLinx DL-HDE100-H2 HDBaseT extender set extends HDMI audio, video as well as control

up to 100m / 330' using a single Category 6 cable. Supports HDMI 2.0a, HDR10 and HDCP 2.2 as well

as Dolby Atmos and DTS:X audio formats. Control extension supports bidirectional IR, Ethernet pass

through and RS232 pass through.

The DigitaLinx DL-HDE100-H2 can transport HDMI data rates up to 18Gbps up to 100 meters. The sys-

tem enables high data rates by utilizing visually lossless compression at a 2:1 data compression rate

when the signal surpasses 10Gbps, anything under 10Gbps will never be compressed.

Built-in surge protection and diagnostic LEDs ensure hassle-free and robust installations. Flexible

power design allows the units to be powered at either the TX or RX end, and only one power supply is

required to power the set. The

the power from being accidentally disconnected.

The DL-HDE100-H2 is sold only as a set. The individual transmitter and receiver are not compatible with

other HDBaseT devices due to proprietary PoE circuitry.

• DL-HDE100-H2 Extender Set

• Quick Install Guide

• (1) IR Emitter

• (1) IR Broadband Receiver (30-50KHz)

• (1)

DC12V 2A power supply

• (4) Mounting clips with mounting screws

• (1) IR-AC IR coupler cable

• (2 Phoenix 3.5mm 3 pin male connectors

Product Overview

12 volt

power supply is secured with a screw-on connector to prevent

with US, UK, EU and AU power adapter plugs