Epson VS315W Швидке налаштування

Переглянути онлайн або завантажити pdf Швидке налаштування для Проектор Epson VS315W. Epson VS315W 4 сторінки. Multimedia projector
Також для Epson VS315W: Декларація про відповідність (4 сторінок), Огляд продукту (4 сторінок)

Друкувати сторінку

VS210/VS310/VS315W

Quick Setup

Before using the projector, make sure you read the safety instructions in the

online User's Guide.

Note: These illustrations show the VS310/VS315W, but the instructions are the

same for the VS210 unless otherwise noted.

Connect the projector

Choose from the following connections. See the sections below or the online

User's Guide for details.

Computer

USB Port

Connect the square end of a USB cable to the projector's

(square) port. Connect the flat end of the cable to any USB port on your

computer.

Windows

2000 SP4 or later: After turning on the projector, follow

the on-screen instructions to install the Epson USB Display software

(EMP_UDSE.EXE; only on first connection). If the software screen does not

display automatically, open My Computer or Computer, then double-click

EPSON_PJ_UD.

Mac OS

X 10.5.1 or higher: After turning on the projector, the setup folder

for USB Display appears in the Finder. Double-click USB Display Installer and

follow the on-screen instructions to install the Epson USB Display software

(only on first connection).

Note: If you have problems installing the USB Display software, make sure the

USB Type B setting in the projector's Extended menu is set to USB Display.

See the online User's Guide for instructions.

Monitor Port

Connect one end of a VGA cable to the projector's Computer port, and the

other end to your computer's

switch it to external display (see "Troubleshooting"). You can also connect an

audio cable.

Video Device

Connect up to 3 video devices and use the remote control to switch

between them.

USB cable

VGA cable

USB TypeB

monitor port. If you are using a laptop,

Audio cable

S-Video cable

Component video to VGA cable

RCA video cable (composite video)

Turn on your equipment

Turn on your computer or video source.

Plug in the projector. The power light on the projector turns orange.

Open the A/V Mute slide all the way.

Press the

power button on the projector or remote control. The

projector beeps, the power light flashes green, and then stays on.

Note: To shut down the projector, press the

unplug it. You don't have to wait for the projector to cool down.

The default language of the menu system is English. To select another

language, press the Menu button on the remote control. Select

Extended and press Enter. Select Language and press Enter. Select

your language and press Enter. Press the Menu button to exit the menu

system.

Adjust the image

If you don't see an image, press the Source Search button on the

projector or remote control to select the image source.

Note: If you still see a blank screen or have other display problems, see the

troubleshooting tips on the right.

To raise the image, press the foot release button and lift the front of the

projector. Release the button to lock the foot in position.

power button twice, then