Argent Data Systems ADS-SR1 Посібник користувача - Сторінка 19

Переглянути онлайн або завантажити pdf Посібник користувача для Ретранслятор Argent Data Systems ADS-SR1. Argent Data Systems ADS-SR1 20 сторінок. Simplex repeater

Друкувати сторінку

##80<1/0> - Timed CW ID On/Off

##801 turns on the timed Morse code ID, and ##800 turns it off. This ID

function is separate from the CW ID auto-response function. When enabled, the

ID will be transmitted at the programmed interval regardless of activity. Default

is off.

Example: ##801 – Turn on CW ID

##83<time> - Set CW ID Timer

Sets the time interval for Morse code IDs. This option is enabled with the

##80 command, and is independent of the auto-response ID. Default is 10

minutes.

Example: ##8310 – Set CW ID time to 10 minutes

##80<3/2> - Enable or Disable Cleanup CW ID

##803 enables the cleanup ID option, and ##802 disables. If the cleanup ID

option is enabled, the timed CW ID will only activate once after a period of

inactivity determined by the CW ID timer, rather than operating continuously.

Example: ##803 – Enable Cleanup ID

##15<1/0> – CW ID Auto-Responder On/Off

Enables or disables CW ID auto-response. The repeater will respond to a

transmission with a Morse code ID (set with the ##82 command) when enabled.

If the CW ID inhibit timer (##84) is set, the ID response will be sent only as often

as specified by that timer setting. Default is off.

Example: ##150 – CW ID off

##84<time> - Set CW ID Inhibit Timer

When the Morse code ID auto-response feature (##151) is enabled, this

timer determines how often the ID will be sent in response to a transmission. For

example, if the timer is set to 10 minutes, the ID will be sent in response to the

first transmission heard, and not again until at least 10 minutes have passed and

another transmission is heard. Default is 10 minutes.

Example: ##8405 – Set CW ID inhibit timer to 5 minutes

##81<nn> - Set CW Speed

Sets the transmission speed for Morse code messages. Accepted values

are 00-99, ranging from very slow to very fast. Default is 80.

Example: ##8195 – Set CW speed to 95% (very fast)

Voicemail Commands