DigitaLinx DL-A51 Посібник з монтажу - Сторінка 3

Переглянути онлайн або завантажити pdf Посібник з монтажу для Матричний комутатор DigitaLinx DL-A51. DigitaLinx DL-A51 4 сторінки. 5x1 hdmi

Друкувати сторінку
The included remote control can be used to switch the HDMI source for the display
device. Connect the included 38KHz IR Receiver Cable to the IR input port on the matrix
switcher. Please make sure that the remote is pointed directly at the IR receiver.
Important notice:
•
Do not attempt to disassemble or alter the extender housing. There are no user-
serviceable parts inside the unit. Doing so will void your warranty.
•
To minimize the possibility of equipment damage from electrostatic discharge
(ESD), all source and destination equipment must be powered off during installation.
•
Do not connect the extender to a telecommunication outlet wired to unrelated
equipment. Doing so may damage the unit or any connected equipment. Ensure all
connected twisted pair cabling is straight-through (point-to-point).
•
Allow proper ventilation to reduce the risk of thermal failure.
IR Remote Functionality