Cisco Aironet 600 Series Посібник користувача - Сторінка 13
Переглянути онлайн або завантажити pdf Посібник користувача для Бездротова точка доступу Cisco Aironet 600 Series. Cisco Aironet 600 Series 44 сторінки. Officeextend access point
Також для Cisco Aironet 600 Series: Посібник з конфігурації (4 сторінок)
Друкувати сторінку
Chapter 1
Unpacking and Installing the Access Point
Cisco Aironet 600 Series OfficeExtend access points are designed to work behind a router or other
Note
gateway device that is using network address translation (NAT). NAT allows a device, such as a home
router or gateway, to act as an agent between the Internet (public) and a personal network (private),
thereby enabling an entire group of computers to be represented by a single IP address. There is not limit
to the number of Cisco Aironet 600 Series OfficeExtend access points that can be deployed behind a
single NAT device.
Resetting the Access Point
To reset a 600 Series OfficeExtend AP, hold the mode button (next to the power button) down for
20 seconds to clear the configuration and restart the unit with the factory default settings.
Understanding the Access Point LEDs
The LEDs on the top panel indicate the operating status of the unit.
indications for 600 Series OfficeExtend Access Points. A properly functioning and configured AP
transitions from blinking blue to solid within ten minutes. Usually the time will be much shorter.
Table 1-1
Status LED
Purple
Blue
Flashing blue
Flashing orange
Cycling through purple, orange, and
blue
Cycling through purple, orange
Orange
OL-29882-03
LED Status Indications for 600 Series OfficeExtend Access Points
Meaning
Association status, when CAPWAP is connected: Normal
operating condition, but no wireless client associated.
Association status, when CAPWAP is connected: Normal
operating condition, at least one wireless client association.
Operating Status: Software upgrade in progress.
Operating Status: No IP address, waiting for DHCP IP.
Operating Status: Discovery/join process in progress, no
client associated.
Operating Status: Discovery/join process in progress, with
client associated.
Cisco IOS errors: Software failure; try disconnecting and
reconnecting unit power.
Cisco Aironet 600 Series OfficeExtend Access Point User Guide
Resetting the Access Point
Table 1-1
provides LED status
1-5