ARGENTO PERFORMANCE Посібник користувача - Сторінка 12

Переглянути онлайн або завантажити pdf Посібник користувача для Велосипед ARGENTO PERFORMANCE. ARGENTO PERFORMANCE 20 сторінок. Electric pedal-assisted cycle

Друкувати сторінку

6. ASSEMBLY

6.1 Performance model assembly

1. Carefully remove the bike from the

packaging, then remove all the protective

material, being careful not to scratch the

painted parts and not pull the bike cables.

The removal of the bike from the packaging

must be carried out by two adults, in order to

avoid injuries or crushing.

2. Insert the front wheel in the housings of

the front fork, tighten the wheel with the quick

closing device.

3. Tighten the front light, make sure that the

front light is correctly aligned with the center

of the fork.

4. Remove the front plate located on the

handlebar stem.

Place the handlebar into the accommodation

of the handlebar stem.

Position the previously removed plate in its

original position and tighten the respective 4

bolts; make sure that the handlebar is in a

central position.

5. Insert the seat post into the bike making

sure to orient the saddle and tighten the seat

post correctly with the appropriate device on

the frame as shown in the photo on the right.

For structural and safety reasons, it is strictly

forbidden to extract the seat post beyond the

limit indicated on the seat post to avoid the

risk of fractures to the frame.

6. Identify the right pedal by means of the R

mark placed on the pedal axis, while the L

mark identifies the left pedal. Tighten the left

pedal anticlockwise and the right pedal

clockwise, in their respective positions to

avoid serious injuries while using the bike

and damaging the bike.

MAKE SURE ALL BOLTS AND PEDALS

ARE TIGHT