Epson 4880 - Stylus Pro Color Inkjet Printer Інструкція з використання - Сторінка 2

Переглянути онлайн або завантажити pdf Інструкція з використання для Принтер "Все в одному Epson 4880 - Stylus Pro Color Inkjet Printer. Epson 4880 - Stylus Pro Color Inkjet Printer 5 сторінок. Ink fill for the refillable cartridge system
Також для Epson 4880 - Stylus Pro Color Inkjet Printer: Посібник зі швидкого встановлення (1 сторінок), Посібник з експлуатації мережі (46 сторінок), Посібник з монтажу (4 сторінок), Інформаційний посібник про продукт (16 сторінок), Обмежена гарантія (12 сторінок)

7. After filling a cartridge with ink, the funnel can be rinsed with water, air dried and used for later refilling. If the funnel stains and can't be

cleaned to a "new" condition, this will not contaminate your inks. However, introducing even small amounts of ink from one color bottle into

another color bottle will contaminate your inks, so be careful of this.

Color Ink Users:

Match label on the ConeColor Pro or Ink-Thrift (dye) ink bottles, cartridge color label and printer's ink position label.

Gently shake the ink cartridge every few weeks to keep pigment in suspension and printing full density, as pigment inks settle over time. ConeColor

Pro specific ICC color profiles should be used to get the highest quality output with ConeColor Pro inks, which can be downloaded from here:

shop.inkjetmall.com/About/ICC-Profile-Libraries/

custom ICC profiles for papers not already profiled.

Piezography Ink Shade Placement:

This table applies to Piezography ink, make sure to follow the shade placement chart for the specific setup you're using. 

Shade 1 is the darkest (black) and Shade 7 is the lightest. For easy refilling (and to avoid accidental mis-filling carts with the wrong ink), we

recommend writing the ink and shade # on the side of each cartridge, following the chart below.

Note: For Piezography gloss printing, Photo Black, Gloss Overprint, and glossy curves must be used. Contact Inkjetmall for more information or to

have a custom Piezography curve made. 

11/21/2016

along with instructions for printing with a color ICC profile. Contact Inkjetmall to purchase

Insert# 101

http://

Page ! of !