Ace Amusement Wild West Shoot Out Посібник - Сторінка 17
Переглянути онлайн або завантажити pdf Посібник для Аркадні ігрові автомати Ace Amusement Wild West Shoot Out. Ace Amusement Wild West Shoot Out 20 сторінок.
Друкувати сторінку
VI. Fault Analysis and Troubleshooting
Common Faults
Fault phenomena
After the machine is
The monitor is not energized.
powered
on,
(the
power
supply
fan
The signal wire of the display is not connected or
works), but the display
damaged.
is not on.
The power supply is inconsistent with the
machine's parameters.
After the machine is
Fuse is burnt out.
powered on, nothing
happens
and
the
The power supply is not connected.
screen is not lit.
The signal wire of the display is not connected or
damaged.
The machine is not
Check whether the input of the 110V~220V power
powered on.
supply is right. The short circuit is not allowed.
The control panel is
Check whether the output of 12V of the power
not powered on
supply box is normal.
The cable of the display might fall off or be loosen
The display has no
due to vibration.
raster.
The display is not on..
The circuit protector generates an action and the
The power is off on
power switch is turned off (Note: The circuit
the midway.
protector cuts off the current when the abnormal
current flows).
After the product is
powered
on,
the
display is a white
The host machine does not work.
screen
without
any
image or sound.
Shoot the target, but
no responds
Wild West Manual
Main cause
Camera not in the correct position
Camera damaged or the wiring loosed
The Gun Infrared damaged
16
Corrective action
Please reconnect the power cable or replace it
with new.
Please reconnect the signal wire or replace it
with new.
Please check whether the power supply is
consistent with the machine's parameters.
Please replace the fuse.
Please confirm 110V~220V power supply is
connected and the power switch is on
The signal wire of the display is not connected
or damaged.
Please check whether the voltage of the circuit
board inside the machine is abnormal.
Please adjust the cable to the correct position.
Please check the power supply circuit or replace
the power line.
Turn on the machine again manually.
Please turn on the power switch again. When
the circuit protector repetitively acts, it indicates
that the machine is abnormal. Please contact the
dealership.
Manually start the power start button of the host
machine.
The host power is bad or replaced.
The motherboard memory bank is bad or
replaced.
The motherboard is bad. Please contact
professional and manufacturer.
Enter the Menu to adjust well the camera
position.
Replace Camera or check the wiring.
Replace the Gun Infrared