ACU-RITE 02048HD Інструкція з експлуатації - Сторінка 13

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Метеостанція ACU-RITE 02048HD. ACU-RITE 02048HD 16 сторінок.

*To change from AUTO to MANUAL pressure mode and vice versa, press

AND HOLD the "

the current pressure mode selected,"AUTO" or "MANUAL".

After 5 seconds of inactivity, the display will save the adjustments and exit

calibration mode. Note: Calibrations will be erased if the display is reset or if

batteries are removed and the power adapter is unplugged.

Care & Maintenance

Display Unit Care

Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives. Keep

away from dust, dirt and moisture. Clean ventilation ports regularly with a

gentle puff of air.

Outdoor Sensor Care

Clean with a soft damp cloth. Do not use caustic cleaners or abrasives.

Replace Intelli-Time Clock Battery

Intelli-Time technology is powered by a pre-installed coin-cell battery that stores

the time and date settings. The battery has a shelf life of several years. To

replace the Intelli-Time battery:

1. Locate the coin cell battery

compartment door on the

back of the display unit.

Unscrew and remove the

compartment cover.

2. Insert 1 x CR2032 coin

cell battery into the battery

compartment, as shown.

Install battery with "+"

positive terminal facing OUT.

3. Screw in the battery cover.

" button for at least 10 seconds. The display indicates