Epson C11CA27201 - WorkForce 40 Color Inkjet Printer Короткий посібник - Сторінка 16

Переглянути онлайн або завантажити pdf Короткий посібник для Принтер "Все в одному Epson C11CA27201 - WorkForce 40 Color Inkjet Printer. Epson C11CA27201 - WorkForce 40 Color Inkjet Printer 36 сторінок. Wi-fi color printer
Також для Epson C11CA27201 - WorkForce 40 Color Inkjet Printer: Важлива інформація про налаштування (3 сторінок), Короткий посібник (9 сторінок), Посібник з встановлення мережі (36 сторінок), Технічні характеристики (2 сторінок)

4. Check the nozzle check pattern that prints to see if there are gaps in the lines.

5. If there are no gaps, the print head is clean. If there are gaps or the pattern is

faint, clean the print head as described in the next section.

Cleaning the Print Head

If print quality has declined and the nozzle check pattern indicates clogged

nozzles, you can clean the print head. Print head cleaning uses ink, so clean it only

if necessary.

Note:

Print head cleaning uses ink, so clean it only if quality declines and the nozzle check

indicates the print head needs to be cleaned. You cannot clean the print head if an ink

cartridge is expended, and you may not be able to clean it when a cartridge is low. You

must replace the cartridge first (see page 19).

1. Make sure the printer is on and the

2. Hold down the

which lasts around 1 minute.

Caution:

Never turn off the printer during head cleaning or you may damage it.

3. When the P power light stops flashing, run a nozzle check (as described on

page 15) to verify that the print head is clean.

4. If there are still gaps or lines, or the test patterns are faint, run another

cleaning cycle and check the nozzles again.

Note:

If you don't see any improvement after cleaning the print head three times, turn off the

printer and wait at least six hours to let any dried ink soften. Then try cleaning the print

head again. If quality does not improve, one of the ink cartridges may need to be

replaced. If that doesn't help, contact Epson as described on page 28.

If you do not use your printer often, it is a good idea to print a few pages at least once a

month to maintain good print quality.

Maintaining Your Printer

Nozzles are clean

ink button for at least 3 seconds to start the cleaning cycle,

Nozzles need cleaning

ink light is off.