Epson C11CA29201-O 800 Посібник з встановлення мережі - Сторінка 24

Переглянути онлайн або завантажити pdf Посібник з встановлення мережі для Принтер "Все в одному Epson C11CA29201-O 800. Epson C11CA29201-O 800 29 сторінок. Artisan 800 series using the control panel for wireless network installation

Друкувати сторінку

Scanning Problems

Cannot find the scanner or start Epson Scan

■

If you're using Mac OS X, make sure that you configured the Epson Scan

network settings (see page 18).

■

If network communication was interrupted while starting Epson Scan, exit

Epson Scan, and restart it after a few seconds. If Epson Scan cannot restart,

turn the printer off and back on, and then try restarting Epson Scan. Check

the

Timeout Setting

Scan Help.

■

If you have a firewall or Internet security software installed, the search feature

EPSON Scan Settings

Network Status Sheet (see page 25), click

Enter address

■

If you are scanning a large document at high resolution, a communication

error may occur. If the scan did not complete, lower the resolution.

■

The printer's IP Address may have changed. If the printer is set to obtain an IP

address automatically, the IP address may change each time the printer is

turned on. If the IP address has changed, you will need to repeat the steps in

"Configuring Epson Scan Network Settings" on page 18. To keep the IP

address from changing, try the following: always power on your network

devices in the same order, always keep the printer on, or set your DHCP

server to reserve an IP address for the printer (see your router's documentation

for details).

Troubleshooting

EPSON Scan Settings

may not work correctly. In this case, print a

, and enter the IP address manually.

. For details, see the Epson

EPSON Scan Settings

Add