Cisco Linksys Wireless-G WBP54GV2 Посібник користувача - Сторінка 18
Переглянути онлайн або завантажити pdf Посібник користувача для Бездротова точка доступу Cisco Linksys Wireless-G WBP54GV2. Cisco Linksys Wireless-G WBP54GV2 50 сторінок. Bridge for phone adapters
Друкувати сторінкуWireless-G Bridge for Phone Adapters
10. The new settings will be displayed. Review them before you proceed. Click Next to save your new settings, or
click Back to return to the previous screen.
11. The Bridge will attempt to connect to the wireless network using the new settings.
Make sure the Bridge's Wireless LED is solidly lit or flashing. This indicates that the Bridge has connected to
the wireless network. If the attempt succeeds, proceed to step 12.
If the attempt fails, you have two options offered by a pop-up screen. Click the Yes button to save the new
settings and proceed, or click the No button to return to the Choose a Wireless Network screen and
reconfigure the settings.
12. Disconnect the Ethernet network cable of the Bridge from the router or PC.
Click Next to proceed, or click Back to return to the previous screen.
Chapter 4: Setting Up and Connecting the Wireless-G Bridge for Phone Adapters
Running the Setup Wizard
Figure 4-13: Confirmation Screen
Figure 4-14: If the Bridge Does Not Connect... Screen
Figure 4-15: Disconnect the Network Cable from the
Router Screen
13