Cisco Meraki MR52 Посібник з монтажу - Сторінка 16

Переглянути онлайн або завантажити pdf Посібник з монтажу для Бездротова точка доступу Cisco Meraki MR52. Cisco Meraki MR52 17 сторінок. Dual-band enterprise class 802.11ac wave 2 cloud-managed access point
Також для Cisco Meraki MR52: Посібник з встановлення обладнання (25 сторінок)

Друкувати сторінку

Verify Device Functionality and Test Network Coverage

1. Check LEDs

a. The Power LED should be solid green (or blue, if clients are connected). If it is ﬂashing blue, the ﬁrmware is

automatically upgrading and the LED should turn green when the upgrade is completed (normally within a

few minutes). See the

b. Note: Your AP must have an active route to the Internet to check and upgrade its ﬁrmware.

2. Verify access point connectivity

a. Use any 802.11 client device to connect to the AP and verify proper connectivity using the client's web

browser.

3. Check network coverage

4. Conﬁrm that you have good signal strength throughout your coverage area. You can use the signal strength meter

on a laptop, smart phone, or other wireless device.

Troubleshooting

Reference the

MR Product Page

"LED

Indicators" section for more details. .

for additional information and troubleshooting tips.