Cisco WAP150 Посібник із швидкого старту - Сторінка 4
Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Бездротова точка доступу Cisco WAP150. Cisco WAP150 13 сторінок. Reboot and reset to factory default settings
Також для Cisco WAP150: Посібник (4 сторінок)
Друкувати сторінку
- 1. Before You Begin
- 2. Cisco WAP150 Features
- 3. Mounting the Cisco WAP150
- 4. Wall Mounting
- 5. Placement Tips
- 6. Connecting the Cisco WAP150
- 7. Verifying the Hardware Installation
- 8. Getting Started with the Configuration
- 9. Suggested Next Steps
- 10. Troubleshooting
- 11. Rebooting the Cisco WAP150 or Resetting to Factory Defaults
- 12. Where to Go from here
• Place the Cisco WAP150 horizontally on a flat surface so that it sits on
its four rubber feet.
• Mount the Cisco WAP150 to a wall.
Wall Mounting
The Cisco WAP150 can be wall-mounted using the wall-mount slots on the
bottom cover. The wall-mounting hardware is user-supplied.
The dimensions for the wall-mount slots and mount kit screws are as
follows:
4
Cisco WAP150 Quick Start Guide