Cisco WAP371 Посібник із швидкого старту - Сторінка 6
Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Бездротова точка доступу Cisco WAP371. Cisco WAP371 38 сторінок. Reboot and reset to factory default settings
Також для Cisco WAP371: Посібник із швидкого старту (15 сторінок), Посібник (5 сторінок), Посібник (4 сторінок)
Друкувати сторінку
Verifying the Hardware Installation
5
To verify the hardware installation, complete the following tasks:
• Check the cable connections.
• Check the state of the indicator lights.
Label
Activity
Power
Off
Solid Green
Flashing Green
Solid Red
WLAN
Off
Solid
Green
Amber
Blue
Flashing
LAN
Off
Solid Green
Solid Amber
Flashing
If you need help resolving a problem, visit the Cisco Small Business Support
N
OTE
Community at www.cisco.com/go/smallbizsupport.
6
Description
The device has no power.
The device is powered on. Normal operation.
Upgrading firmware or acquiring an IPv4 address.
Booting or firmware upgrade failed.
Wireless is disabled, for both 2.4 GHz and 5 GHz.
Wireless is enabled.
Concurrent mode enabled. (The intensity needs to be
the same)
5 GHz is in use.
2.4 GHz is in use.
Transmitting or receiving data.
No Ethernet link.
GE Ethernet link is active.
FE Ethernet link is active.
Transmitting or receiving data.
Cisco Small Business WAP371 Series Wireless Access Point