Cisco Aironet 1000 Series Посібник - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник для Конференц-система Cisco Aironet 1000 Series. Cisco Aironet 1000 Series 20 сторінок. Install and upgrade internal modules and field replaceable units
Також для Cisco Aironet 1000 Series: Посібник з розгортання (40 сторінок), Оновлення (28 сторінок)
Друкувати сторінку
Install and Upgrade Internal Modules and Field Replaceable Units
Install and Remove Small Form Pluggable Modules
This section describes how to install and remove Small Form Pluggable (SFP) modules in the Cisco 1100
Series ISRs. The information is contained in the following sections:
Warning
Pluggable optical modules comply with IEC 60825-1 Ed. 3 and 21 CFR 1040.10 and 1040.11 with or without
exception for conformance with IEC 60825-1 Ed. 3 as described in Laser Notice No. 56, dated May 8, 2019.
Install Small Form Pluggable Module
This section describes how to install optional small-form-factor pluggable (SFP) modules in the Cisco ISR1000
series Integrated Services routers to provide optical Gigabit Ethernet connectivity.
Only SFP modules certified by Cisco and complies with IEC 60825-1:2014 are supported on these routers.
For more information, refer to
Note
The SFP module-GLC-GE-100FX V01 is not supported on the Cisco111x Series.
Warning
Class 1 laser product. Statement 1008.
Warning
Pluggable optical modules comply with IEC 60825-1 Ed. 3 and 21 CFR 1040.10 and 1040.11 with or without
exception for conformance with IEC 60825-1 Ed. 3 as described in Laser Notice No. 56, dated May 8, 2019.
Remove Small Factor Pluggable Module
To remove a small factor pluggable (SFP) module from the chassis:
Step 1
Disconnect all cables from the SFP.
Step 2
Disconnect the SFP latch.
Note
SFP modules use various latch designs to secure the module in the SFP port. For information on the SFP
technology type and model, see the label on the side of the SFP module.
Use a pen, screwdriver, or other small straight tool to gently release a bale-clasp handle if you cannot reach it
Tip
with your fingers.
Step 3
Grasp the SFP on both sides and remove it from the chassis.
SFPs Supported on Cisco 1100
Install and Upgrade Internal Modules and Field Replaceable Units
Install and Remove Small Form Pluggable Modules
ISRs.
5