Epson ET-4700 Series Посібник із швидкого старту

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Принтер "Все в одному Epson ET-4700 Series. Epson ET-4700 Series 4 сторінки.

Друкувати сторінку

ET-4700

Start Here

IMPORTANT: Before using this product, make sure you read

these instructions and the safety instructions in the online

User's Guide.

Important Safety Instructions:

you should always follow basic safety precautions to reduce the risk of

fire, electric shock, and personal injury, including the following:

• Do not use the Epson

product near water.

• Always keep this guide handy.

• Avoid using a telephone during an electrical storm. There may be a

remote risk of electric shock from lightning.

• Do not use a telephone to report a gas leak in the vicinity of the leak.

Caution:

To reduce the risk of fire, use only a No. 26 AWG or larger

telecommunication line cord.

Unpack

Note:

Do not open the ink bottles until you are ready to fill the ink

tanks. The ink bottles are vacuum packed to maintain reliability.

Remove all protective materials from the product.

Note:

Do not turn on the product yet.

Fill ink tanks

Warning:

Keep the ink bottles out of the reach of children and do not

drink the ink.

Caution:

This product requires careful handling of ink. If ink spills,

wipe it off immediately with a damp towel to avoid permanent stains. If

ink gets on your clothes or belongings, it may not come off.

When using telephone equipment,

Note:

• Epson cannot guarantee the quality or reliability of non-genuine ink.

• Use the ink bottles included with the printer to set up the product.

Part of the ink will be used to charge the print head. These bottles

may print fewer pages compared with replacement ink bottles.

Open the ink tank cover and the cap for the black ink

tank.

Note:

Refer to the color-coded sticker on the ink tank unit to

identify the color of each tank.

Unpack the black (BK) ink bottle. Hold the ink bottle

upright and slowly turn the bottle cap to remove it.

Caution:

Do not shake or squeeze the ink bottle. Do not touch

the top of the ink bottle after its cap is removed.

Place the top of the ink bottle on the filling port, then

slowly stand the bottle upright to insert it, as shown.

Note:

Do not force the bottles into position; they are keyed for

each color.

Wait for the ink to fill the tank. Do not squeeze the bottle.

Note:

Ink flows into the tank and stops automatically when the

ink tank is filled to the upper line. If ink does not flow from the

bottle, lift and reinsert the bottle.